How can we help you?
+49 7461 9617-0
Office Hours Mo - Th
08:00 am - 4:00 pm
Office Hours Friday
08:00 am - 12:00 am
Extraction Set
RfQ Universal Extraction Set for Intramedullary Nail Systems
| >> Leaflet "Universal Extraction Set for Intramedullary Nails" |
511 KB
|
| >> Manual "Universal Extraction Set for Intramedullary Nails" |
245 KB
|
Orthopedic Instruments
19-72234-24
Lock Grip Forceps Stainless Steel with hardened edges 24 cm long
19-72234-20
Lock Grip Forceps Stainless Steel with hardened edges 20 cm long
19-72234-18
Lock Grip Forceps Stainless Steel with hardened edges 18 cm long
19-73234-30
Needle Nosed Locking Pliers with hardened edges Stainless Steel, conical with
V-groove 30 cm
19-73234-25
Needle Nosed Locking Pliers with hardened edges Stainless Steel, conical with
V-groove 25 cm
19-73234-22
Needle Nosed Locking Pliers with hardened edges Stainless Steel, conical with
V-groove 22 cm
19-73522-20
Self retaining Rod Gripper, hardened edges, 20 cm
19-73715-18
Parallel Plier with hardened edges, with Side Cutter for wires to 1,6 mm diam
18,5 cm long
19-73716-18
Parallel Plier with hardened edges, 18,5 cm long
19-73810-24
Bending Plier Stainless Steel with hardened edges, for plates to 3,0 mm diam
24 cm long
19-73810-20
Bending Plier Stainless Steel with hardened edges, for plates to 1,6 mm diam
20 cm long
19-74000-43
Plate Bending press with hardened edges, adjustable, Locking Handle in
2 position for plates to 6,0 mm diam 43 cm long
19-74100-28
Rod Bender, for Rods to 7 mm diam, 28,5 cm long
19-74110-18
Pin Cutter canulated, Stainless Steel, hardened for Pins to 1,6 mm diam, 18,5
cm
19-74110-16
Diamond Pin Cutter, Stainless Steel, hardened for Pins to 2,0 mm diam, 16 cm
19-74200-26
Pin Cutter front for Pin cutting to 3,2 mm diam, 26 cm
19-74200-58
Pin Cutter for Pins to max. 6,35 mm diam,
detachable in three Parts. Total length: 57,5 cm
19-75000-23
Neuro Caliper with mm- und inch - calibration, complete Stainless Steel und
non magnetic Depht Gauge with round foot plate. Special long inner part 90 mm
19-75200-42
Standard Bone Mill with hand winder, Stainless Steel, to use also with motor
connection, 42 cm
19-75200-43
Clamp for attaching of the Bone Mill to the operating table
19-75200-44
Cutting drum for the Bone Mill with 4 cutting rose in front, hole diam 4,2 mm
19-75200-43
Cutting drum for the Bone Mill with 5 cutting rose in front, hole diam 3,2 mm
19-75510-34
Pelvic repositioning pliers, simple and quick fixation in both directions by
two nuts
19-75610-26
A triple reamer for DHS/DCS with a three edge fitting. The reamer consists of
a scaled drill and a burr with a collet chuck and a collet nut Milling
diameter 13 mm Drilling diam 8 mm Total length 240 mm
Milling Shaft 26 mm
19-75610-41
A triple reamer for DHS/DCS with a three edge fitting. The reamer consists of
a scaled drill and a burr with a collet chuck and a collet nut Milling
diameter 13 mm Drilling diam 8 mm Total length 240 mm
Milling Shaft 41 mm
19-75700-26
Wire Spanner Stainless Steel with Scale to 125 kg Span tension for wires
from 1,5 to 2,5 mm, Total length 26 cm
