Fiber Light Guides Sterilization Containers Oscillating Plaster Saws
Cleaning Jet Pistol von RfQ-Medizintechnik

SELECTA Cleaning Jet Pistol (Spray Gun Rinser)

>> Catalogue "SELECTA Spray Gun"
600 KB Download

SIMPLY
INDISPENSABLE
IN THE
CLINIC,
LABORATORY,
OR
MEDICAL
PRACTICE

The Selecta Spray Gun is the ideal instrument for cleaning laboratory glassware, pipettes, syringes, catheters, cuvettes, endoscopes, cystoscopes, cannulae and a variety of other instruments and articles used in clinics, laboratories, and medicalpractices in other words, everywhere where highest cleanliness and hygiene are mandatory.

The Selecta Spray Gun uses either water or pressurized air this means the cleaning process is quick, efficient and inexpensive. The Selecta Spray Gun features a new type of internal flow control mechanism. It permits the smooth and simple adjustment of the water or air flow across the entire range of the trigger movement.
The desired maximum water or air flow can be set by using the small knurled screw located behind the trigger. It is then regulated via the trigger up to the set maximum value.

THE SELECTA SPRAY GUN WITH CONUS AND WITHOUT TUBING CONNECTOR

with metal tubing ...
tubing with PVC ... (Standard)

 

... with conus and tabletop rosette, 3/4“ connection mounted

THE PRACTICAL SELECTA TABLETOP ROSETTE

The tabletop rosette, a threaded hollow
cylinder, facilitates the installation
of the Selecta Spray Gun in the sink
or a countertop. The spray gun is then
within easy reach. The tubing with the
respective connector to the water
or air supply is stored away underneath
the counter or sink, thus keeping the
work area clutter-free.

A SET OF ATTACHMENTS THAT MEETS EVERY NEED

A
B
C
D
E
F
G
H

Rinsing, suction or drying in every area of application is made possible through the set of 8 attachments. The standard set of 8 attachments is delivered on a stable storage rack for mounting on the wall. All attachments are kept within easy reach.

EASY TO USE

The Selecta Spray Gun features a new type of internal flow control mechanism. It permits the smooth and simple adjustment of the water or air flow across the entire range of the trigger movement. The desired maximum flow can be set by using the small knurled screw located behind the trigger. It is then regulated via the trigger up to the set maximum value.
All attachments are connected to the spray gun by seating them on the safety cone located at the spray gun tip. Even high pressure cannot disconnect them. The gun grip is heatinsulated.

The Selecta Spray Gun can be ready for operation very quickly:

1. The storage rack with the attachments is fastened to a wall near the sink or work area.
2. The tubing is connected to the tap with an threaded connector. If the spray gun is to be operated with compressed air, the tubing must be connected to the air supply by means of a suitable connector (can not be supplied by RfQ).

 

64-20900-00
RfQ-SELECTA Spray Gun Rinser new model complete with 1,5 m tube, guide cone, standard set and 3/4" screwing loosely

64-20900-01
RfQ-SELECTA Spray Gun Rinser new model complete with 1,5 m tube, guide cone, standard set and 1/2" screwing loosely

64-20920-01
RfQ-SELECTA Spray Gun Rinser new model with 1,6 m metal tube, guide cone, table-top rosette and 3/4" screwing assemled

64-20920-02
RfQ-SELECTA Pure Spray Gun Rinser new model

64-20920-05
RfQ-SELECTA Spray Gun Rinser new model with 1,5 m tube and guide cone assembled (End open)

64-20920-06
RfQ-SELECTA Spray Gun Rinser new model with 3,0 m tube and guide cone assembled (End open)

64-20620-05 Tip A for carheters, valves etc.

64-20620-06 Tip B for drainage tubings

64-20620-08 Tip C spray jet for rapid instrument cleaning

64-20620-03 Tip D for syringes and cannulas with record cone

64-20620-04 Tip E for masuring and blood pipettes

64-20620-07 Tip F for syringes and cannulas with Luer cone

64-20620-09 Tip G for bottles and Erlenmeyer flasks

64-20620-10 Tip H Selecta water jet pump for suction cleaning

64-20621-00 Table-top rosette 54 mm with guide cone

64-20621-01 Table-top rosette 54 mm with nut without guide cone

64-20621-02 Guide cone to screw

64-20620-11 Tip M long nozzle, straight, 10 in.

64-20620-12 Tip N long nozzle, angled, 10 in.

64-20620-20 Standard set A-H with stable rack

64-20620-21 Stable rack for 8 attachments complete with 2 screws

64-20630-09 Screwing 3/4" complete

64-20630-10 Screwing 1/2" complete

64-20630-11 Screwing 3/8" complete

Spare parts for spray gun rinser

64-20630-01 Spray gun rinser tip complete

64-20630-02 O-ring 3x1

64-20630-03 Spiral tension pin

64-20630-04 Trigger

64-20630-06 Connection between gun and tubing

64-20630-07 Hose clip

64-20630-08 Replacement kit flow control

64-20630-12 Clamp for PVC-tube

64-20630-13 Clamp for metal-tube

64-20630-14 PVC-tube (cut good)

64-20630-15 Grip for spray gun rinser

64-20630-16 Sealing 3/4"

64-20630-17 Sealing 1/2"

64-20630-18 Sealing disc

64-20630-19 Tubetull

64-20630-20 Reduction ring 1/2" and perlator

64-20630-21 Reducing ring 1/2" and 3/8"

64-20630-22 Hook

64-20630-23 Metal tubing 3/4" junction, 1,6 m

64-20630-24 Metal tube (cut good)

 

 

More equipment for cleaning on request.